Phosphor Coating

Amko SOLARA only uses imported, quality-assured phosphor powder for our induction lamps.
CIE Color Parameters:
Chromaticity Coordinate: x=0.3443 y=0.3564/u=0.2091 v=0.3246
CCT: Tc=5043K Prcp: d=569.5nm Purity=10.3%
Peak WaveL: λp=545nm Half Width: λp=8.5nm Ratio: R=19.7% Rendering Index: Ra=80.2
R1 =93Z R2 =88 R3 =54 R4 =84 R5 =85 R6 =76 R7 =84 R8 =76
R9 =16 R10 =43 R11 =75 R12 =58 R13 =94 R14 =70 R15 =92
 
Photo Parameters:
Flux: Φ= 16661(lm) Eeff* = 0.8655mW/klm Kred = 14.61%
Instrucment Status: Interval: 5.0nm Ip = 18655
Scan Range: 200.0nm-800.0nm % = 0.00% TMP (PMT) = 25.6degrees celcius
REF = 21567
 
Unlike the powder used in other Chinese induction lamps, Amko's phosphor powder produces higher efficiency with longer life time.
Products | Case Studies | News&Events | Service&Support | About US
Copyright © 2010 Amko SOLARA Lighting Co., Ltd.